Established in 2009,BPM(The Best Project Material Co.,Ltd) factory covers an area of 26,000 square meters, employs 80 people, has 5 geomembrane production machines, roll width can be 8 meters, 10 meters; Geomembrane can produce the output of 5 containers a day;Three geotextile production machines, which can produce the output of 3 containers of geotextile. As China's largest domestic geomembrane export factory, the annual output value of 200 million CNY .BPM has been adhering to "Quality builds brand enterprise" concept to serve customers. Thanks to 16 years of old customers trust, our company's customers are more than ten years of cooperation of old friends, the return rate is very high.
Our Certificates
All BPM brand HDPE geomembranes have passed the certificates of the ISO9001, ISO14001, TUV, Soncap, SASO, BV certificates and passed the test of SGS and Intertek etc.
One-Stop Service
Since its inception in 2009, BPM has been committed to providing one-stop geomembrane and geosynthetics services to customers worldwide.
Our Factory
BPM has more than 120 professional staff and 26,000 square meters manufacturing factory equipped with state of the art production lines.
Production Capacity
As China's largest domestic geomembrane export factory, the annual output value of 200 million CNY .
| Application |
| Retaining Wall, Steep Slop, Dam, Road Base |
| Viscose |
| Without Viscose |
| Function |
| Anti-slip, Reinforcement |
| Classification |
| Plastic Geogrid |
| Material |
| Plastic |
| Tensile Strength |
| 25-150kn |
| Roll Size |
| 3.95*100m/2*50m |
| The Elongation Ratio |
| Not More Than 10% |
| Certificate |
| CE/ISO9001/BV |
| Length |
| 50/100m |
| Transport Package |
| Black PE Film or Woven Bags for Outside Package |
| Specification |
| 3.95*100m/2*50m |
| Trademark |
| Zhongloo |
| Origin |
| China |
| HS Code |
| 392590000 |
| Production Capacity |
| 100000 Square Meter /Day |
Strengthening soil stability
Geogrids can effectively increase the tensile strength and shear resistance of the soil, improving its stability. It can withstand large loads and disperse them to a wider area, reducing soil settlement and deformation.
Provide soil filtration and drainage functions
The geogrid has certain water permeability, which can filter the particles in the soil, and remove excess water to prevent ponding and Soil liquefaction. This helps to maintain good drainage performance of the soil and prevent soil erosion and landslides.
Preventing soil erosion
Geogrids can be used to prevent soil erosion on slopes, river banks, lake embankments, and other areas. It can effectively resist the impact of water currents and waves, slow down the erosion rate of rivers and oceans, and protect the integrity of soil.
Improving engineering construction efficiency
The use of geogrids can simplify the construction process, reduce the amount of earthwork excavation and filling, and save labor and time costs. It can also be constructed under complex terrain conditions, improving the efficiency of engineering construction.
Durability and sustainability
Geogrids typically have a long service life and can withstand long-term natural and environmental erosion. It has properties of UV resistance and chemical corrosion resistance, and can maintain stability under different climate and soil conditions.
Slope erosion protection
In this case, geogrids can either retain rainwater or delay their flow along the slope. Therefore, they eliminate the appearance of rutting, one of the main causes behind the effects of erosion. On the other hand, their honeycomb shaped mesh structure facilitates water retention, thereby promoting root growth.
●Slopes in coastal areas: Our geogrids are fully compatibles with slopes exposed to the action of water, such as those located in coastal areas. Pebbles may be used as a filler in order to prevent wave erosion.
●Slopes in reservoirs: By placing and refilling the geogrid with granular material, we can protect against erosion while preventing weed growth, in addition to providing an alternative, cost effective solution to the installation of gabions.
Installation on canal banks
During any canalisation building works, rockfill dams are often installed on canal banks as an anti erosion method. However, using geogrids can provide further advantages and solutions when compared to these traditional methods. With these geogrids, you can provide a flexible structure that retains concrete in steep gradient canal banks. In this case, the cells create small concrete blocks that can adjust to any surface irregularities without resulting in cracking.
Surface stabilisation
With the installation of geogrids, we can efficiently reduce the amount and quality of aggregate required to stabilise low bearing capacity grounds. By using our geogrids you can prevent the aggregate from being shifted by applied loads. Since the cells comprising the material are connected to each other, any applied loads are distributed among wider areas. In this case, the potential savings in aggregate material and their transportation make geogrids a highly recommended option in terms of both value for money and efficiency.
Soil retention on slopes
Geogrid are designed for installation on steep gradient slopes. In most cases, the material used to fill the geogrids shall be readily available in the area where it is to be installed, i.e., topsoil, thereby providing the wall with a friendlier aspect while reducing external water flow.
Uniaxial geogrids
Uniaxial geogrids is chased by macromolecule polymers, and constructed by longitudinal tension. This category of geogrids is integrity with evenly distributed elliptical net structures. It has more flexible strength and tensile modulus. With this type of structure, the geogrids gives an ideal interlock system for the soil. It has high one-sided strength and capacity, and high lateral constraint for soil-rock mixtures. All property indexes of it are superior to geogrids without tensity. It is an ideal reinforced material currently, like reinforced earth structures in strengthened retaining walls, reinforced steep slopes, bridged support, and highways, railways, and airports.
Biaxial geogrids
The material of biaxial geogrids is alike with the material of unidirectional geogrids. Its chemical property isn’t active as well. It is chased by macromolecule polymers and constructed by longitudinal and horizontal tensions. This type of material has a more tensile strength in both longitudinal and horizontal directions. This kind of structure gives an interlock system for the soil and is fitted for the improvement of roadbeds with wide areas of permanent loads, for instance, treatment of soft soil foundation and augmented earth structures.
Triaxial geogrids
Triaxial is a revolutionary afresh geogrids product. The triangular design of triaxial geogrids, associated with the increased rib thickness and junction ability, greatly enhances aggregate interlock and confinement – Resulting in the optimal structural performance of the mechanically stabilized layer. Research signifies that triaxial geogrids can lessen aggregate base/sub-base requirements by 25% to 50%.
| Package Size |
| 60.00cm * 60.00cm * 100.00cm |
| Package Gross Weight |
| 4.000kg |
With high performance and good reputation, our machines are not only welcomed in China, but also have been exported to more than 80 countries and regions in the world, including，United States, Canada, Mexico, Brazil, Colombia, Chile, United Kingdom, Italy, France, Germany, Spain, Netherlands, Romania, Russia, Japan, South Korea, Turkey, Thailand, Indonesia, Malaysia, Vietnam, Philippines, Pakistan, India, Uzbekistan, Egypt, Algeria, Saudi Arabia, United Arab Emirates, South Africa and many other countries.
We're known as one of the most professional geogrid manufacturers and suppliers in China. Please rest assured to buy high quality geogrid made in China here from our factory. For price consultation, contact us.
(0/10)
