Plastic biaxial geogrid is the kind of geosynthetic material that is widely used to reinforce retaining walls, as well as subbases or subsoils below roads or structures. Plastic geogrid is often made from plastic materials which may be high-density polypropylene or high-density polyethylene (HDPE) resins through the processes of extruding, sheet forming, punching and stretching.
In civil and environmental engineering, plastic biaxial geogrid is widely used in soil reinforcement, slope stabilization, retaining walls, road and railway embankment reinforcement, coastal protection, river channel management, land reclamation and other aspects. It can effectively improve the shear strength, stability, and drainage performance of the soil, thereby enhancing the safety and reliability of the project.
Compared with traditional steel or concrete geogrid, plastic biaxial geogrid has the advantages of being lighter, easier to transport and install, more environmentally friendly, and more economical. At the same time, it can adapt to various complex terrains and environmental conditions and has a wider range of application prospects.
Plastic Biaxial Geogrid Features
- High tensile strength in both directions
- Excellent tensile modulus
- Higher load-bearing capacity
- Excellent soil stabilization
- Good sub-base reinforcement
- Heavy-duty foundation support
- Anti-corrosion, erosion control
- Good aperture stability
BPM has been manufacturing and supplying one stop geogrid products and solutions to worldwide customers since its foundation in 2007. BPM had provided many types of effective and state of the art geosynthetics such as geogrids, geomembranes, geotextiles, geocells, geosynthetic clay liners (GCLs), drainage boards to over 36 countries. Our customers are from Australia, France, Sweden, the UK, Hong Kong, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, Ghana, Ethiopia, Somalia, Nigeria, South Africa, Swaziland, Mongolia etc.
BPM is not only manufacturing the best quality geogrid products but also providing professional design and installation service. OEM, ODM and custom fabrication are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.
| Item | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG35-35 | TGSG40-40 | |
|---|---|---|---|---|---|---|---|
| Tensile Strength (kN/m) | Longitudinal | ≥15 | ≥20 | ≥25 | ≥30 | ≥35 | ≥40 |
| Transverse | ≥15 | ≥20 | ≥25 | ≥30 | ≥35 | ≥40 | |
| Elongation Rate (%) | Longitudinal | ≤13 | ≤13 | ≤13 | ≤13 | ≤13 | ≤13 |
| Transverse | ≤16 | ≤16 | ≤16 | ≤16 | ≤16 | ≤16 | |
| Strength at 2% elongation (KN/m) | Longitudinal | ≥5 | ≥8 | ≥8 | ≥11 | ≥12 | ≥13 |
| Transverse | ≥7 | ≥10 | ≥11 | ≥13 | ≥14 | ≥15 | |
| Strength at 5% elongation (≥KN/m) | Longitudinal | ≤8 | ≤10 | ≤11 | ≤15 | ≤15 | ≤16 |
| Transverse | ≤10 | ≤13 | ≤13 | ≤15 | ≤18 | ≤20 | |
Hot Tags: pe geogrid for road construction, China pe geogrid for road construction manufactures, suppliers, factory, Plastic Geogrid, Geosynthetic Reinforcement Geogrid, Pavement Geogrid, Biaxial Uniaxial Geogrid, Retaining Wall Grid
